Beyer M-58 Microphone from Eastern
Electronics at only £129.99 inc. delivery & VAT
The M 58 has been specifically designed to satisfy the
demands of electric news
gathering (ENG) and electronic field production (EFP) applications.
Its sophisticated internal shockmount dramatically reduces handling
noise, while the
microphone’s frequency response has been tailored to provide broadcasters
with a very
accurate and intelligible sound.
The M 58’s weight-balanced design provides journalists with a high degree
of comfort
during lengthy interviews. Its rugged construction enables the microphone
to
withstand physical and environmental punishment typically encountered
during field
production operations. The M 58’s slim profile and non-reflective Nextel®
finish result
in a low profile on camera.
- FEATURES
• High output moving coil transducer
• Internal shockmount reduces handling noise
• Extended frequency response with rising high-end for maximum intelligibility
• Rugged construction
• Non-reflective Nextel® finish
• Weight-balanced, slim-profile design
Transducer type. . . . . . . . . . . . . . . . . . . . . . . . . .
. . Dynamic moving coil
Operating principle. . . . . . . . . . . . . . . . . . . . . . . .
. Pressure gradient
Frequency response . . . . . . . . . . . . . . . . . . . . . . . .
40 - 20,000 Hz
Polar pattern . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Omnidirectional
Open circuit voltage
at 1 kHz (0 dB =^ 1 V/Pa) . . . . . . . . . . . . . . . . . . . .
. 1.3 mV/Pa =^ -58 dBV
EIA sensitivity rating . . . . . . . . . . . . . . . . . . . . . .
. . -149 dBm
Nominal impedance . . . . . . . . . . . . . . . . . . . . . . . .
200 ohm
Load impedance . . . . . . . . . . . . . . . . . . . . . . . . . .
. 200 ohm
Weight without cable . . . . . . . . . . . . . . . . . . . . . . .
. . . 256 g
|
Click
here to order the M58
Click
here to order the M58 with 3.5mm connector lead
Other microphones from Beyer
M201
List of other equipment from
Eastern Electronics by type or manufacturer
If you can't find what you require,
please contact us
Back to Home
page