Technical Specifications:
Microphone Inputs:
- Two inputs on 3.5mm jack socket, 3.5mV adjustable priority
Line Input:
- Two phono sockets, 200mV adjustable sensitivity
Tone:
- Adjustable tone control, +16dB -20dB ay 1kHz
Output Connector:
- 2-part terminal block to connect to supplied 33m loop cable
Auxiliary Connector:
- 2-part terminal block for closing contact from doorbell etc.
Headphone Output:
- 3.5mm jack connector
Indicators:
- Green power on, Red input signal, Green to Yellow to Red loop strength
Loop Current:
- >2 Amp Peak signal current into supplied SINGLE TURN loop
AC Power Supply:
- 230 Volt AC, 50-60 Hz.
- Power consumption 20 W. Max.
- 12Vac supply via 2.1 mm concentric power plug
Dimensions:
- 40 x 80 x 185mm
Weight:
- 550g (amplifier only)
Signet DL50/K Induction Loop Driver Product Sheet
Back to Our Induction Loop Page