AMPETRONIC ILD100 Induction Loop Driver at only £274.99 inc. delivery and VAT from

Eastern Electronics

Click here to order!

List of other equipment from Eastern Electronics by type or manufacturer

If you can't find what you require, please contact us

Technical Specifications:

Microphone Inputs:

• Two inputs, suitable for use with electret microphones
• DC powering for electret capsules
• VOX control from input 1

Line Input:

• Impedance 60K each side, 20K differential
• Sensitivity: matched to normal SCART signal levels

Loop Current:

• 4.5 Amp Peak signal current into a SINGLE TURN loop
• Monitoring via front panel LED, which indicates current peaks

Loop Resistance:

• Must be less than 1ohm but greater than 0.3ohm

Compression:

• Compression range from 36dB to overload
• Front panel indication
• Attack and Decay time constants optimized for speech

Frequency Response:

• 80 Hz to 5 KHz ±1.5dB at low level, measured as loop current
• High frequency high signal level response is a dynamic variable and is a function of loop size, loop current and signal content to ensure that no RFI generation takes place
• Internal time constants are very short

AC Power Input:

• 230 Volt AC, 50-60 Hz
• Power consumption: 22W maximum

Dimensions:

• Length: 216 mm
• Width: 124 mm
• Height: 44 mm

Weight:

• 1.3Kg

Accessories supplied:

• 1 microphone (10 mm diameter) Tieclip style
• 1 cable, SCART to 2 Phono
• 1 AC input power cable

The AMPETRONIC ILD100 Induction Loop Amplifier carries a 5 year warranty.

AMPETRONIC ILD100 Induction Loop Amplifier Product Sheet